Ithaca have tight chambers and steel does not have the elasticity that brass has and won't contract the same after it has been fired. a good cleaner and a toothbrush can do wonders.Ĭol is also right about the steel based loads, too. In many cases you can clean out the trigger group without having to strip it, but for really bad cases, you do have to strip it to parts to do the best job. Taking them apart is pretty easy, there aren't alot of parts, but you do have to align the parts carefully to get the pins back. You have to take the stock off for that, but it sound like the slide release mechanism is fouled pretty badly, is frozen with oxidized oil or a combination of the two. before doing anything else, give it a really good cleaning, especially the internal parts. Well, Col, I appreciate the complement, but you hit the nail right on the head. If not Ravengunsmith will be along shortly, he's your man! This combined with using brass hulls might just fix your problem. I use WD-40 in the barrel only because it is cheap and does a better job than anything I've ever used at loosening up plastic fouling You'd be surprised what comes out of the barrel. Douse it liberally in WD-40 insert it into the camber, turn on the drill, and polish the fool out of the chamber until you feel the barrel get hot to the touch.Īctually do this to the whole barrel followed by normal cleaning with patches. Put a cleaning brush on the other end, and wrap some 0000 steel wool around the brush. First chuck your cleaning rod in an electric drill. If the chamber (not just the barrel) hasn't been cleaned well in a while, here's what I would do. ![]() The boy shoring them ad to carry a stick to poke down the barrel to knock the empties out. Heck, I even witnessed them sticking in a single shot once. If your chamber isn't just right it can cause them to stick. Steel or mystery metal bases expand when fired, but unlike brass they don't contract fully. Winchester Universals or similar el cheapo hulls are known to give problems in many shotguns. How long has it been since the barrel has been off for a good cleaning? What kind of ammo are you using? Two of the most common reasons for hard extraction are dirty chambers and steel based hulls.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |